Bravo specializes in HVACR, particularly on sales and maintenance of duct fabrication machinery.

 

Multiple unit sizes and variations available upon request.

 

 
NEW BRAVO SPIRAL DUCT FORMING MACHINE NEW BRAVO SPIRAL DUCT FORMING MACHINE
NEW BRAVO SPIRAL DUCT FORMING MACHINE
$0.00

BRAVO SPIRAL DUCT FORMING MACHINE

Included features

2200 lb capacity payoff reel.

Control Panel with easy to use interface…programmable in English – Spanish

Length control by Infrared Sensor Switch

Flying Slitter Cut-off System….smooth and quiet.

Plasma Cutting System… special for heavy gauges.

10ft Run Out Table with Automatic Dumping

Receiver table for duct sections dumped from the Run Out Table

Beading Attachment optional (for stiffening lighter gauges)

Two roll formers cassettes to enable duct forming from 26 gauge to 18 gauge galvanized.

Hard Tool Molds, from 4” to 70” (pairs diam)

Forms mild steel, aluminum and stainless

Meets SMACNA Standards

Internationally recognized and available components to include but not limited to:

Schneider Electrics

Siemens PLC and Touchscreen

Delta Inverter

NSK Bearings

Hypertherm Plasma Unit

Specifications

Power: 220/3/60

Pneumatics required: 100 psi with minimum of 200 l/min.

Capacity: 26 ga. to 18 ga. galvanized mild steel

Strip width: 5.394”

Foot print 154” x 140” x 70”high

Weight 4,630 lbs

Programmable feed speed range approx. 0-100 FPM.

Expected Performance,

based on 10ft sections.

– 0.5 mm (0.020’’) thickness – 100 mm (4”) diameter – 120 Ducts/hour

– 0.7 mm (0.028’’) thickness – 500 mm (20”) diameter – 45 Ducts/hour

– 0.9 mm (0.035’’) thickness – 1250 mm (50”) diameter – 15 Ducts/hour

 
 

 
NEW BRAVO HYDRAULIC ROUND ELBOW MACHINE NEW BRAVO HYDRAULIC ROUND ELBOW MACHINE
NEW BRAVO HYDRAULIC ROUND ELBOW MACHINE
$0.00

HYDRAULIC ROUND ELBOW MACHINE

HYDRAULIC ROUND ELBOW MACHINE Specifications

Diameter Range: 5” to 50”

Max segment angel: 30 degrees (90 degree elbow, 4 parts)

Material Thickness

0.4 – 1.0 mm (26 ga- 20 ga.) galvanized steel

0.4 – 0.8 mm (26 ga.-22 ga.) stainless steel

0.4 – 1.2 mm (22 ga-18 ga) aluminum

Flanging Speed

Max. Adjustable to 120 m/min. (394 fpm)

Production Time

90 sec. (bend ø 200 mm, 90° / 4 segments)

Electrical Connection: 4KW, 220volts/3phase/60Hz

 
 

 
NEW BRAVO OVALIZER DUCT MACHINE
NEW BRAVO OVALIZER DUCT MACHINE
$0.00

BRAVO OVALIZER DUCT MACHINE

Specifications

Diameter Range: 16” to 60”

Oval Duct Size: H 6-20″ W 20.5-90.5″

Material Thickness

0.4 – 1.2 mm (26 ga- 18 ga.) galvanized steel

Effective Lenght

120″ (3 m)

Electrical Connection: 11KW, 220volts/3phase/60Hz

 
 

 
NEW BRAVO 6018 DUCT LINE
NEW BRAVO 6018 DUCT LINE
$0.00

BRAVO 6018 DUCT LINE

AFFORDABLE. Now a CNC rectangular duct line is within the financia! reach of even the smallest HV AC contractor. lt costs less than the contractors new pickup truck and this duct line will pay for itself in labor, material costs and scrap savings in about 10 months (assuming 150,000+ lbs. processed per year)

RELIABLE & SUPPORTABLE … anywhere in the world. No matter where it is used in the world, this duct line has been designed to be able to be supported locally. We build the machine with internationally respected and available components. Whether in Dubai or Johannesburg, parts for this machine are available.

Benefits

Fast Payback. lf you produce 150,000 lbs. of duct or more in a year, you can expect the savings in material and labor costs to pay for this machine in 10 months or less.

Accuracy. Everything is automatic and precise; servomotor and encoder are better than just using measuring tape.

Always ready. The Bravo 6018 Rect Duct Une beats you to work, does not take lunch or breaks.

Material Savings. Most users save between 18 and 24% on scrap and as much as 20% with coils.

Labor savings = payroll savings. Make duct in a fraction of the time when produced by hand.

Specifications:

Capacity: 60″ x 18 Gauge Galvanized

Electrics: 220/3/60 (Standard)

Max duct length: 13′

Footprint: 7′ x 28′

Max Coil Weight: 12,000#

Max Coil Width: 60″

Min duct width: 8″

Max Thickness of Metal: 18-gauge mild steel

Line Speed: Approx. 0-30 fpm

Uncoiling: One carriage with two 6000 lb. x 60″ wide payoff reels, with expandrels

Touch Screen CNC Controlled

Automatically Feeds off the Coil

Straightens, Beads, Notches (S&Drive, TDC and TDF)

Shears and Brakes to Half Sections or Full Wrapper Duct

PLC: Panasonic

Electrics: Schneider or Siemens

Rotary Encoder: Nemicon (Japanese)

Bearings: Torrington, SKF or Koyo

Hydraulics: Huade (Taiwan)

Servo motor: Yaskawa

Touch Screen: Weilun