USED  ROLLFORMING - ROLLFORMERS - PITTSBURGH -LOCKFORMERS -

FLAT S - STANDING S - BUTTON SNAP LOCK - FLANGERS
HVAC - TRIPLEX-DRIVE CLEAT - QUADFORMER - DUPLEX LOCKFORMER TDC - ENGEL TDF

CLICK ICON FOR NEW ROLLFORMERS-LOCKFORMERS

LOCKFORMER LARGE PITTSBURGH $CALL US
Capacity 18 ga.
Number of Stations 7
Forming Speed 60-65 FPM
Overall Dimensions, L x W x H 58-1/2" x 24" x 41"
Weight (Approx.) 625 lbs.
Motor 3 HP
Electrics 220V/3 PHASE
Serial No.

TDF ENGEL 16 Station TDF® PREOWNED  Rollform Machine Includes Patented TDF® Rolls.
ALSO WITH CLIP ROLLS DOWN THE MIDDLE SECTION INCLUDED.
Unitized steel High yield and tensile strength shafts and “off the shelf” ball bearings
Heavy duty gears are Mod4 (6 pitch)
Extended roll shafts for mounting auxiliary rolls, one side outboard Optional tooling sets available for outboard
All steel forming head, hardened steel infeed guide and hardened steel forming rolls mounted on turned and ground
No adjustments necessary when going from 26ga to 18ga
Includes Snap Flange
Comes standard with short parts feeder for 6 inch minimum lengths ASKING SPECIAL PRICE $12,500

This Lockformer 1" Standing "S" machine is in very nice condition, includes 1" Standing S rolls down the middle, Standing Seam Rolls on the Right. Runs nice, see video IF WANTED  Many additional photos available if needed simply email us or call us at 972 878-6181 Thanks!

ASKING $12,500

SOLD NOW

USED WHISPER -LOC BY LOCKFORMER / IOWA PRECISION

FOR THE HVAC DUCT FASTENER  $9,500
Closes duct work – whether Pittsburg or slip and drive – seams in a fraction of the time, from 26 to 16 gauge
Motorized control moves the clamp and slide block, as a unit, for faster set up – one handed
Greatly reduced noise levels
Minimal floor space required
Micro-processor controlled for ease of operation
Low maintenance 220 V single phase 2 HP (1.5 kw)
Self-contained 10-gallon (38 liter) hydraulic unit
Weight: 1,550 pounds (704 kg)
35″ wide x 32.5″ high x 96″ long (889 x 825.5 x 2438 mm)
hammer over in Pittsburgh and full length hammer over of at least 45″ in slip and drive
The Whisperloc closes seams in ducts only requiring a minimal of hammer over top and bottom to assure straight and complete seaming
Seams from top and bottom to the middle to avoid run out and incomplete seaming

20 Ga Lockformer SS Pittsburgh  $3,800
Model Super Speed with Auxiliary Double Seam Rolls.

Price: Request a Quote For Price
General Specifications:Type
Rollformer
Capacity
20 to 26 gauge
Number of Stations
5
Speed
75 Feet per Minute
Motor
2 HP
Model No.
Super Speed
Overall Dimensions (L x H x W)
58 x 41 x 24
Approx. Weight
450 lbs.
Electrics
220V/3-Ph
Serial No.

USED 16 Ga RAMS SLITTER WITH CABINET   $2,600
Model 1624 HEAVY DUTY  RUNS LIKE NEW

SHIPS FROM TEXAS


This Lockformer 1" Standing "S" machine is in very nice Runs nice, see video you tube  Many additional photos available if needed simply email us or call us at 972 878-6181 Thanks!

ASKING $12,500

This engel  1" Standing "S" machine is in very nice condition, includes 1" Standing S rolls down the middle,  Runs nice, see video IF WANTED  Many additional photos available if needed simply email us or call us at 972 878-6181 Thanks!

ENGEL 825 IS MODEL W SLITTER CUTTER TABLE

ASKING $12,500

FLAGLER BUTTON SNAP LOCK General Specifications:
Capacity 20-24 ga.
Number of Stations 9
Forming Speed 60-65 FPM
Overall Dimensions, L x W x H 58-1/2" x 24" x 41"
Weight (Approx.) 625 lbs.
Motor 3 HP
Electrics 220V/1-Phase NEW NOW
Serial No. FLAGLER 20 BPSL


$5200

$4

ROLLFORMER  FOR TRIM WORK

"J" channel roll form line

runs a 1" high leg "J" channel, 5" strip for part, 24ga - 20ga.

Contour 12 pass gearhed mill, 2" shafts, 9" R.S.

15 HP DC motor with electric drive and operator controls

Tishken 18 ton hi speed mechanical press with flying shear

ASL 2500 lb. powered uncoiler, manual I.D.: 16" - 21"

Elec: 220/440v 3ph 60cy

 

Price ....... $34,000.00 loaded truck

 

This Lockformer 1" Standing "S" machine is in very nice Runs nice, see video you tube 14 STATION TRIPLEX

Many additional photos available if needed simply email us or call us at 972 878-6181 Thanks!

ASKING $ CALL US

NICE USED 22 Ga FLAGLER  Pittsburgh  $ CHEAP PRICE
Model with Aux DRIVE CLEAT

Price: Request a Quote For Price
General Specifications:Type
Rollformer Capacity 22  gauge
Number of Stations 5 Speed 30 Feet per Minute
Motor 2 HP
Model No. Super Speed
Overall Dimensions (L x H x W)58 x 41 x 24
Approx. Weight450 lbs. Electrics 220V/3-Ph Serial No.

LOCKFORMER JR PITTSBURGH $CALL US
Capacity 24 ga.
Number of Stations 5
Forming Speed 30 FPM
Overall Dimensions, L x W x H 58-1/2" x 24" x 41"
Weight (Approx.) 450 lbs.
Motor 1 HP
Electrics 115 V/1 PHASE
Serial No.