Welders-Spot-Pin-Mig-Tig-Stick-Circle-Butt
CONSIDER NEW CLICK PHOTO TO SEE MFG PAGE
USED MILLER 10KVA SPOTWELDER
USED LINCOLN IDEALARC 300 WELDER  SN: AC 247604
USED 40 KVA SPOTWELDER

Pinspotters

LF 1000/2000 LN HAND HELD PINSPOTTER

The LF is a portable unit (9 lbs.) that welds 14 gauge PN style pins to ductwork up to 22 gauge. Insert a PN Pin into the magnetic tip and depress the trigger. A timed burst of electricity fuses the pin to the steel. It can also weld LN style pins up to 5-1/2” long with the use of a TPL2 tip purchased separately. Available in 110v & 220v, 50 to 60hz; fuse for 15 amps.

Image 2 LF Lit Sheet >
LF Owner's Manual >

 

 

 

 

 

 

MF-12 COMPACT PINSPOTTER

The MF-12 welds BDEP, CTC, SSP, CP, FTC, PN or LN type fasteners to ductwork up to 20 gauge. It requires 220 volt, 50 to 60 hz service fused for 30 amps. Place a pin on the magnetic tip. Insert the pin through the insulation, give the pin a 1/4 twist, and depress the trigger switch. For LN type fasteners use a TPL2 tip. For PN type fasteners use a TP2 tip.

Image 2 MF12 Lit Sheet >
MF12 Owner's Manual >

PBF-510 HEAVY DUTY PINSPOTTER

The PBF-510 welds BDEP, CTC, SSP, CP, FTC, PN or LN type fasteners to ductwork up to 18 gauge. It requires 220 volt, 50 to 60 hz service fused for 100 amps. Place a pin on the magnetic tip, insert the pin through the insulation, give the pin a 1/4 twist and depress the trigger switch. For LN type fasteners use a TPL2 tip. For PN type fasteners use a TP2 tip.

Image 2 PBF-510 Lit Sheet >
PBF-510 Owner's Manual >


 

 

 

 

 

FG MACH I & II AUTOMATIC BULK FEED PINSPOTTER WITH FIVE FOOT THROAT

The FG MACH I & II welds BDEP, CTC, SSP, CP & FTC type fasteners. The FG MACH I can weld to ductwork up to 20 gauge. It requires 220v, 50 to 60hz; service fused for 30 amps. The FG MACH II can weld to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 psi air is required for both. Footswitch actuated, fasteners are inserted through the insulation and welded in place.

Image 2 FG Mach I & II Lit Sheet >
FG Mach I & II Owner's Manual >

 

 

 

 

 

 

RH MACH II ROLLING HEAD AUTOMATIC PINSPOTTER

RH MACH II welds BDEP, CTC, SSP, CP & FTC type fasteners to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 psi air is required. Position a fastener over the insulation and depress the trigger switch. The machine inserts the fastener through the insulation and welds it to the steel.

Image 2 RH Mach II Lit Sheet >
RH Mach II Owner's Manual >