FOLDING MACHINES - CNC LONG FOLDERS - BRAKES - BENDERS - AUTOBRAKES
BACK TO USED-MACHINES CLICK HERE

CLICK  LINK TO NEW FOLDING MACHINES-CNC

NEW CHINA CNC FOLDING MACHINE

WITH FOOT PEDESTAL OPERATION AND READOUT

NOTE THIS IS FINGER BOX AND PAN BRAKE ALSO.

SOLD FROM CANADA LOCATION

ASKING $42,000


SORRY SOLD NOW

RAS TURBOBEND  2005 CNC FOLDING MACHING

SEE VIDEO ABOVE HERE S61-31/600

with 6000 Touch & More Touchscreen Control. 40" CNC Backgauge.

Portable Foot Control. Elec: 220v 3ph BRAND NEW PAINT JOB SEE VIDEO YOU TUBE RIGHT AND ATTACHED PHOTOS  MACHINE CAN BE SEEN UNDER POWER IN FW TX

Price IN STOCK NOW ....... $35,000.00 SOLD

SOLD JUST RECENT  USED HAYES FOLDING MACHINE
CNC FOLDING MACHINE HURRY IT WILL BE SOLD SOON.

Hayes 16ga. x 21ft. CNC Folder. New 2003. Fujitsu CNC Controller.

Hydraulic Clamping and Bending. Portable Foot Control. Elec: 220v 3ph

Machine and Controller are supported in USA

Under power to inspect.


Price ......... $49,900. Loaded Truck in FL

SORRY SOLD

1 USED RAS CNC FOLDING MACHINE
$24,000 SPECIAL SALE

RAS Turbobend 16ga. x 10ft CNC Folder.

New 1996.

MODEL 61.31 SN: 18/9   40" CNC Backgauge

System 4000 Touch Screen Controller. Foot Pedal Control. Elec: 220v 3ph

Machine can be repaired by RAS TECH ONLY

SORRY SOLD

2008 Jorns 16ga x 21ft, Longfolder  CNC 500 Controller with Spare. New 2011.  Power Nose Slitter

for Triam width, 39" CNC Backgauge, Portable Foot NEWER CNC TOUCH SCREEN Control.

Elec: 480v 3phn    Under power to inspect. Video Soon

 ACTUAL PHOTOS NOT HERE YET WILL BE SOON

Price ..........  $85,000  Loaded on truck CA

THIS IS OLDER MACHINE SHOWN AND WAS NOT SOLD THE SELLER BACKED OUT ALSO.

SORRY SOLD 

  The Roper Whitney is from 2007. has the Orion Controller. 16ga. x 21ft.

39" CNC Backgauge. Portable Foot Control. Hydraulic Operation.

Electric:  220/440v 3ph  

Machine has low hours of use and in very good condition.

Machine under power to inspect. Replacement cost today is 140K

 WE CAN FIND YOU OTHER ALIKE

SORRY SELLER IS BACKING OUT AND KEEPING NOW 

 

SORRY SOLD

2017 Thallman Cidan 18ga x 21ft, Longfolder  WITH NEW Controller . New 2017  NO SLITTER ON MACHINE

, 39" CNC Backgauge, Portable Foot  PEDAL AND  CNC TOUCH SCREEN Control.

Elec: 440-230v 3phn    Under power to inspect. Video Soon

MACHINE NOT HERE .  LOCATION IS GA

Price ..........  $109,995  Loaded on truck up north GA

NOTE 18GA CAPACITY FOLDING MACHINE

 

SOLD NOW 2016 CIDAN 1014 FOLDER
CIDAN 10FT  X 14GA CNC FOLDER

14GA Mild Steel Capacities.
THIS LIKE NEW Model

THEY HAVE HARDLY USED MACHINE

AVAILABLE IN GA TO SEE AND RUN 

PHOTOS HERE TO RIGHT

STILL HAS GREAT PERFORMANCE VALUE

CUSTOMER IS READY TO SELL FAST

ASKING $48,995 

MUCH LESS PRICE AS NEW, BUT READY NOW

YOU DONT HAVE TO WAIT 12-16 WEEKS .

 

SCHECHTL Model MA 310 10 FT CNC FOLDING BRAKE

SPECIAL BRAND NEW COMPUTER CONTROL JUST ADDED REFURBISHED SCHECHTL CNC SHEET METAL FOLDER.  SCHECHTL 16GA. MAX CNC SHEET METAL FOLDER. 

READY TO SHIP. CALL US TODAY $49,000

Model MA 310  is a motor driven bending machine with a capacity of max. 1,5 mm (related to 3100 mm working length). Model MAX stands for power, speed, operating comfort and flexibility. WE WILL LOAD ON TRUCK BUYER PROVIDES

VIDEO RUNNING OR BUYER CAN INSPECT AT GA LOCATION

 ASKING $49,000

READY TO SHIP. CALL US TODAY


ALL MACHINES BELOW HERE ON DOWN ARE SOLD , SORRY

BIG SALE LIKE NEW LONG FOLDING BRAKE MACHINE.

SUPER GOOD DEAL ON JORNS LONG FOLDER 21 FT NEW IN

11-OF 2013 SN: K13137  CNC 800-6.4shs CONTROL

  HIGH SPEED Power Nose Slitter for Triam width,

NORMA-LINE 125SL-1250-RO-SL-CNC 800-6.4 SHS

39" CNC Backgauge, Portable Foot SWITCH Control.

Elec: 480v 3ph MOTOR .  

MACHINE IS IN MINT CONDITION ONLY SELLING

BECAUSE PURCHASE OF DOUBLE FOLDER UPGRADE.

CAN BE SEEN RUNNING  Under power to inspect. Video Soon

 Price ..........  $88,000  Loaded on truck IND.

NICE USED ROPER WHITNEY CNC FOLDING MACHINE
16ga. x 10ft CNC Folder.  39" BACK GAUGE
SN:  102-09-13   NEW IN 2013
Foot Pedal Control. Elec: 220v 3ph

--

--NICE MACHINE RUNS FINE SEEN UNDER POWER

--

--

==PRICE REDUCED to $36,500  WE NEED TO GET IT SOLD

--SHIPS FROM SA TX

FOR SALE NOW JORNS LONG FOLDING BRAKE MACHINE.

SUPER GOOD DEAL ON JORNS LONG FOLDER 21 FT NEW IN

2003 SN: K NEW   CNC JORNS CONTROL

NORMA-LINE 125SL-1250-RO-SL-CNC

REFURBISHED but no WARRANTY at this price

39" CNC Backgauge, Portable Foot SWITCH Control.

Elec: 480v 3ph MOTOR .  

MACHINE IS IN MINT CONDITION

CAN BE SEEN RUNNING  Under power to inspect. Video Soon

 Price ..........  $74,000  Loaded on truck NC.

NEW PAINT JOB AND READY TO SHOW OR SHIP

 TENNSMITH SBS CNC FOLDING BRAKE PAIR NEW IN 2016

SBS 126-14  LMS 126-14 shear
1 SBS 61" back guage 5,500.00 EXTRA ON BRAKE
1 ten ft squaring arm 2,250.00 EXTRA ON SHEAR
2 front support arms for shear 265.00 EXTRA FOR SHEAR
1 digital readout for backguage 995.00 EXTRA ON SHEAR

Portable Foot Control. Hydraulic Operation. Electric:  220/440v 3ph Machine has low hours of use and in very good condition.

Machine under power to inspect. Replacement cost today is 115K

ASKING PRICE ONLY $85,000 FOR PAIR ON SALE IN TX

 

 MUST BE SOLD AS PAIR

RAS FOLDING MACHINE AND SHEAR PAIR S-61-31-600
RAS Turbobend 16ga. x 10ft CNC Folder. AND SHEAR 14GA
39" CNC Backgauge, System 6000 Controller. VIDEO
New 2003. SN

  • REDUCED PRICE NOW ONLY $18,000

  • 20 FOOT APRON BRAKE / LONG AIR FOLDING BRAKE-

  • SHOP BUILT BUT VERY PRECISE.

  • WORKS GREAT SEE VIDEO YOUTUBE BELOW.

  • HAS DIAL INDICATION FOR CLOSE MEASUREMENT.

  • AIR CYLINDERS TOP AND BOTTOM LEAF FUNCTIONS

  • ON SALE NOW HERE IN TEXAS $18,000

  • ALSO CAN BE LOADED ON TRUCK AT LOCATION

  • SEE 2 YOUTUBE VIDEOS RUNNING BELOW
  • CLICK FOR QUOTE

  • Roper Whitney CNC FOLDING BRAKE    SN: 102-09-1995

  • AM 1200 Control. MODEL AM-2116 GOOD CONDITION

  • LONG FOLDER 21 ft x 16ga. 39" CNC Backgauge.

  • Portable Foot Control. Hydraulic Operation.

  • Electric: 220/440v 9.5ph Machine has low hours of use and in very good condition. Videos of running before.

  • Machine in storage now safe in warehouse.

  • ASKING PRICE ONLY $29,995 WE CAN LOAD IT.

  • PRICE WAS REDUCED FROM 40K to 35k now less t 30k

  • THESE MACHINES ARE HARD TO FIND SO BUY IT NOW !

  • WILL BE GONE BEFORE END OF YEAR


  • Roper Whitney CNC FOLDING BRAKE 2008

  • Orion Controller. 16.6 ft x 16ga. 39" CNC Backgauge.

  • Portable Foot Control. Hydraulic Operation. Electric:

  • 220/440v 3ph Machine has low hours ,very good condition.

  • Machine under power to inspect. Replacement cost is 110K

  • ASKING PRICE ONLY $65,000

  • NEW CNC FOLDING MACHINE Model# EFM-1014NC 

  • NC Folder# EFM-1014NC, 10’x14Ga., 3HP, 220V, 3 phase

  • Features ISO 9001 certified OSHA and CE safety standard

  • Max. 16 bends per program Upto 39 Programs Storage

  • Programmable Angle/ Angle Correct 48” NC back gauge

  • and fingers Hardened nose bar and table, up to 48HRC
  • ONLY $38,850 BRAND NEW

  • RAS FOLDING MACHINE AND SHEAR PAIR S-67-30-600

  • RAS Turbobend 12ga. x 10ft CNC Folder. AND SHEAR 12GA

  • 39" CNC Backgauge, System 3000 Controller. new

  • Components and overlay Foot Pedal Control. Elec: 220v 3ph

  • NICE MACHINE RUN FINE SEEN UNDER POWER

  • ON SALE NOW WAKE UP THIS IS GOOD BUY FOR THE $

  • PRICE REDUCED to $ price call us first

  • WE NEED TO GET IT SOLD
  • MACHINES WILL SHIP FROM TX

  • RAS FOLDING MACHINE AND SHEAR PAIR S. 61.31-4000

  • RAS Turbobend 16ga. x 10ft CNC Folder. & Shear 14ga

  • 39" CNC Backgauge, System 4000 Controller.

  • New 1997. SN 21/4

  • Foot Pedal Control. Elec: 220v 3ph

  • NICE MACHINES RUN FINE SEEN UNDER POWER

  • PRICE IS FOR THE PAIR OR $25,000 ON FOLDER

  • PRICE REDUCED to $36,995 FOR THE PAIR

  • WE NEED TO GET IT SOLD

  • MACHINES WILL SHIP FROM KS MO.


  • SCHECHTL Model MAX 3100 REFURBISHED   $46,000.00

  • NEW CONTROL PANEL

  • NEED TO BE SOLD AS PAIR IF POSSIBLE

  • SEE SHEAR PAGE ON SCHECHTL SHEAR AT $21K

  • Schechtl MA 310 cnc folder 16ga x 122", new 2002,

  • 39" cnc backgauge, portable foot control. Elec: 220v 3ph

  • 60cy

  •  10ft long x 16 gauge

  • Price ........  $46,000.00

  • USED CNC 13FT X 11GA CNC FOLDING BRAKE MACHINE

  • GREAT CONDITION CNC FOLDER BY FASTI 2004 YR

  • Fasti folder WILL HAVE SOFTWARE down load from

  • Germany, SOON TO BE UNGRADED AND NEW

  • DOWNLOAD ADDED. THE MACHINE CAN BE SEEN

  • RUNNING NOW. RUNS FINE

  • Serial # 02 225 004 Capacity 4040 x 4.0

  • AT LOCATION IN FL

  • ASKING PRICE IS $55,000.00 INCLUDES

  • Fasti Tech install new software download AND TRAIN

  • PLEASE CALL US FOR DETAILS THIS IS A STEAL

  • 13FT FOLDING MACHINE FOR THE ROOFING INDUSTRY.

  • NEW  Roper Whitney CNC FOLDING BRAKE 2018 - 2019

  • Synergy is the newest software designed for Roper

  • Whitney’s line of powered folding machines. It is a highly

  • advanced CNC system that takes the complexity out of

  • programming and running parts. The full-color, graphical

  • touch screen allows you to store, browse and search for

  • parts, as well as create new parts on the fly.

  • The software also brings together information from the

  • Konstruct Mobile with Roper Whitney’s technical support

  • program Konnect.

  • Easy Windows-based touch screen control

  • Auto sequences the part 3-D part display

  • DXF file import capability

  •  GET YOUR ORDER IN ON NEW ONE TODAY FOR 2019

 SCHECHTL Model MAX 3100 REFURBISHED   $46,000

SPECIAL AVAILABLE NOW FOLDER OFFER USED 2008

MUST BE SOLD AS A PAIR WITH SHEAR ALSO REFURBISHED
CNC-Touch-Control AND WILL INCLUDE A 30 DAY  WARRANTY -- CAN BE PKG WITH SHEAR $65,000 Pair
Model MAX is a motor driven bending machine with a capacity of max. 1,5 mm (related to 3100 mm working length). Model MAX stands for power, speed, operating comfort and flexibility.

  •  NEW CIDAN K15 CNC FOLDER IN STOCK NOW!!!

  • 2018 CIDAN K15 CNC FOLDER

  • FULL WARRANTY READY TO SHIP

  • ASKING PRICE $58,000 LOADED ON YOUR TRUCK

  • PLEASE CALL TO FIND OUT MORE DETAILS